Skip to Content

Welcome!

Share and discuss the best content and new marketing ideas, build your professional profile and become a better marketer together.

Sign up

This question has been flagged

The smart-home system (Control4), DVR and Wi-Fi had network problems. The network closet contained a small unmanaged 5-port switch with every port in use.

Avatar
Discard
Author Best Answer

Cause: An unmanaged 5-port non-PoE switch was acting as a bottleneck and had no free ports. The managed UniFi switch and access points were supposed to be connected through it, and the APs relied on separate PoE injectors.

Fix:

  1. Check the network closet and identify any small unmanaged switches with all ports in use.
  2. Trace the cabling to see which devices (managed switch, access points, modem feeds) connect through it.
  3. Replace it with a managed PoE switch, such as a UniFi 24-Port PoE switch, and adopt it in the UniFi controller.
  4. Re-terminate any damaged or questionable cable ends.
  5. Remove the PoE injectors and plug the access points directly into the PoE switch for easier management.
  6. If an access point does not reconnect, delete it from the UniFi controller and add it again.
  7. Test the smart-home system, DVR and Wi-Fi, and run a wired speed test to confirm full speeds.

Need a hand with this? iknowpc's technicians can help - contact us.

Avatar
Discard
Related Posts Replies Views Activity
1
Nov 26
4
1
Nov 26
4
1
Nov 26
4
1
Nov 26
4
1
Nov 26
5