| Specifications |
|---|
| AMS8: 100-240V, 50/60Hz, 20W | AC Main Power |
| 2 years | Warranty |
| 1U | Rack Spacing |
| <0.005%, 20 Hz - 20 kHz | Total Harmonic Distortion (THD) |
| >105 dB, A-weighted-input to output | SNR |
| 20 Hz - 20 kHz +/- 0.2 dB | Frequency Response |
| +0 to -100 dB range | Volume Control |
| Available on all outputs | Mute |
| 0.5 dB steps, 0 to +12 dB on every input | Source Input Gain |
| Configurable per stereo output pair, each output combines the L/R input signal | Monosumming |
| Adjustable per stereo output, +/- 12 dB, 0.1 dB steps | Six Band Parametric EQ |
| Subwoofer Volume Offset- +/-12dB, 0.5 dB stepsCrossover Type- Selectable Linkwitz-Riley / ButterworthCrossover Slope- Selectable 12 /24 /48 dbCrossover Frequency- 20-300Hz, 1dB stepsOutput Select- Stereo / Mono | 2.1 Audio Zone |
| 44.1 kHz, 48 kHz, 96 kHz, 192 kHz - at 16- or 24-bit resolution | Supported Sample Rates |
| 2V | Analog Input Voltage |
| 2V | Analog Output Voltage |
| 1.32W / 4.5 BTU/hour (standby)7.09W / 24.2 BTU/hour (max) | Thermal Dissipation (heat losses) |
| 0-80 ms | Audio Delay |
| 8 × stereo analog (RCA)4 × digital coax4 × digital opticalInputs 5-8 are either analog or digital | Source Inputs |
| 0-80 ms | Output Delay |
| Low Shelf (Bass) adjustable per stereo output 20-2000Hz, +/- 12dB, 0.1 dB stepsHigh Shelf (Treble) adjustable per stereo output 20-20000Hz, +/- 12dB, 0.1 dB ste | Tone Control |
| 24 x stereo analog (RCA) | Zone Output |
| 4 x mono 3.5 mm(1/8") outputs | 12V Trigger |
| 1 x status LED | Front Power LED |
| 1 x RGB LED | System Power LED |
| 1 x RJ-45 | Ethernet Ports |
| Yes | ID button |
| Yes | Factory Restore Button |
| 5% to 95% non-condensing | Operating Humidity |
| 32°F - 113°F (0°C - 45°C) | Operating Temperature |
| -4°F - 158°F(-20°C - 70°C) | Storage Temperature |
| Without feet: 17.5 x 3.5 x 10.38" (44.5 x 8.9 x 26.4 cm)With feet: 17.5 x 3.88 x 10.38" (44.5 x 9.8 x 26.4 cm) | Dimensions (W x H x D) |
